- Página principal /
- Productos /
- Audio profesional /
- Altavoces /
- Altavoces de rango completo /
- RCF /
- RCF NXL 24-A altavoz activo line array
RCF NXL 24-A altavoz activo line array
General
The NXL 24-A is a large active two-way line array speaker equipped with 4x 6-inch woofers and a 2.5-inch voice coil It has a 100x30-degree dispersion angle, making it excellently suited for use in large venues and other locations where the sound needs to be amplified directly toward the audience to avoid echo and natural reverberation.
1,400 Watts of Power
The integrated amplifier delivers a maximum power handling capacity of no less than 1,400 Watts. Of that power, 400 Watts is designated to the high frequencies, while 1,000 Watts is used for the low frequencies. A new-generation DSP is used for signal processing for outstanding performance quality. The DSP provides control over the crossover, EQ, phase and soft limiting, to provide protection for the speaker.
Uses
The RCF NXL 24-A can be mounted on a stand, hung up or stacked, and its flexibility makes it useful for numerous purposes. You'll find four rubber pads on the bottom and side of the speaker that protect it from cosmetic damage when on the floor. This speaker's also got it covered when it comes to internal protection, as it has been made with robust birch plywood housing. Additionally, the line array is versatile in regards to setup and can be used in fixed installations or for mobile use.
Sugerencias o comentarios sobre este producto
Características
Características del producto
- Bluetooth no
- Diámetro del woofer 6 pulgadas
- Diámetro tweeter 2 pulgadas
- Funciona como monitor no
- Peso del altavoz 26 kg
- Ecualizador integrado sí
- SPL máxima 130 dB - 139 dB
- Frecuencia máxima 20 - 20.9 kHz
- Frecuencia mínima 60 - 79 Hz
- RMS 500 - 749 W
- Analogue audio input type balanced line in (XLR), microphone input (XLR)
- Analogue audio output type thru (TRS jack), thru (XLR)
- Salida para altavoces pasivos no
Peso y las dimensiones incluyen el paquete
- Peso (incluyendo el paquete) 26,4 kg
- Dimensiones (incluyendo el paquete) 116,0 x 33,0 x 23,0 cm
Características del producto
- compact, lightweight line array module from the NX series
- 4x 6-inch woofer with 1.5-inch voice coil
- 2x compression driver with 2.25-inch voice coil
- nominal coverage: 100 x 30 degrees
- 700W amp module
- maximum SPL: 131 dB
- frequency range: 65 to 20,000 Hz
- inputs: combo jack/XLR, unbalanced/balanced
- outputs: XLR
- input sensitivity: -2 dBu / +4 dBu
- crossover frequency: 800 Hz
- protection: thermal, RMS
- limiter: soft limiter
- controls: volume, EQ shape, mic/line
- total power of amp module: 1400 W
- amplification of high frequencies: 400 W
- amplification of low frequencies: 1000 W
- convection cooling
- power supply: locking power in/out
- material cabinet: birch plywood
- hardware: 4x M10 en 4x quick lock
- handles: 2x (sides)
- colour: black
- dimensions: 201 x 1056 x 24 mm (W x H x D)
- weight: 26.4 kg