- Página principal /
- Productos /
- Equipos y efectos para DJ /
- Tocadiscos y platos de DJ /
- Cápsulas y agujas de tocadiscos /
- Audio Technica /
- Audio Technica VM-740ML Dual MM Cartridge with Microline Stylus
Audio Technica VM-740ML Dual MM Cartridge with Microline Stylus
cado
![](https://static.bax-shop.es/image/product/1043701/4012636/10e1a36a/450x450/1671802725Audio%20Technica%20VM-740ML_0010.jpg)
General
The Audio Technica VM740ML is a sublime option if you're looking for a high-quality moving magnet cartridge. This model comes equipped with a microline stylus and offers maximum sonic clarity and spot-on trebles since the tip of the needle makes enhanced contact with the grooves, which simultaneously results in reduced wear of both the needle and your vinyl. To ensure improved channel separation and a wide frequency response range, Audio Technica have placed two magnets in a V-shaped array, while the shield plate in the middle of the cartridge efficiently reins in crosstalk. Meanwhile, the aluminium housing of the VM740ML counters unwanted vibrations and forms a natural electrical shield.
Características
Características del producto
- Sustainable product not specified
- Color amarillo, rojo
- Set no
- Aguja resto
- Componentes tocadiscos cartridge
Peso y las dimensiones incluyen el paquete
- Peso (incluyendo el paquete) 80 gr
- Dimensiones (incluyendo el paquete) 10,8 x 7,5 x 5,0 cm
Características del producto
- Audio Technica VM740ML
- frequency response: 20 - 27,000Hz
- channel separation: 28dB (1kHz)
- vertical tracking angle: 23°
- vertical tracking force: 1.8 - 2.2g (2.0g standard)
- needle construction: nude square shank
- recommended load impedance: 47.000 Ohms
- impedance: 2,700 Ohms (1kHz)
- output voltage: 4.0mV at 1kHz, 5 cm / sec.
- output channel balance: 1dB at 1kHz
- needle shape: micro-linear
- cantilever: tapered aluminium pipe
- static compliance: 40 x 10-6cm / dyne
- dynamic compliance: 10 x 10-6cm / dyne (100Hz)
- recommended load capacity: 100 – 200pf
- replacement needle: vmn40ml
- needle size: 0.12 x 2.2mil
- type: vm
- weight: 80g
- dimensions: 17.3 (h) x 17.0 (w) x 28.2 (l) mm
- included:
- mounting screws (2x 5mm, 2x 10mm)
- 2x washers, 2x hex nuts
- non-magnetic screw driver
- brush
- lead wire set
Opiniones
Reseñas de otros países
Traducir todos los comentarios al español
Goed element .
Was wel even zoeken naar de schroeven en aansluitdraadjes . Deze zitten in de bodem van het doosje .
Mooie klank, investering waard .
Packs de ahorro
Audio Technica VM-740ML + Knosti Disco Antistat
- 1 x Audio Technica VM-740ML Dual MM Cartridge with Microline Stylus 298,00 €
- 1 x Knosti Disco Antistat Record Cleaning Kit 84,00 €
Audio Technica VM-740ML + Ortofon Cartrdidge Alignment Tool
- 1 x Audio Technica VM-740ML Dual MM Cartridge with Microline Stylus 298,00 €
- 1 x Ortofon Alignment Tool for Stylus 6,80 €
Audio Technica VM-740ML + Devine Vinyl Brush
- 1 x Audio Technica VM-740ML Dual MM Cartridge with Microline Stylus 298,00 €
- 1 x Devine Vinyl Brush 11,50 €
Dit is echt het beste element die ik ooit gehad hebt.
Klinkt perfect een geen vervorming aan het einde van de plaat.
Kabeltjes en schroefjes gewoon in het doosje.
Top element voor een hifi installatie.