- Página principal /
- Productos /
- Estudio y grabación /
- Periféricos de estudio /
- Convertidores de audio /
- Focusrite /
- Focusrite RedNet A8R
Focusrite RedNet A8R
General
Save yourself from laying down miles worth of cable and get post-production, broadcasting, live sound and recording work just right with the Focusrite RedNet A8R Dante audio-over-IP network interface and AD/DA converter. Hook it up with up to eight stereo channels and an etherCON or RJ45 cable will cover most of the distance. For increased flexibility, the A8R is even equipped with a set of AES3 I/Os for other digital audio signals while BNC Word Clock I/O allows the unit to synchronise with other devices.
The RedNet: Powered by Dante
Based on the Dante audio-over-IP protocol, Focusrite's RedNet delivers crystal-clear audio with barely any latency and has the level of scalability and versatility needed to operate in large studios, huge concert halls and arenas. In addition, the use of the Dante protocol makes sure you won't have to fuss with a whole of bunch of cables, since all the data can transferred using a single CAT 5e/6 cable. Finished with assuring redundancy options, you'll never need to fear power or data issues with the A8R either.
Características
Características del producto
- Formato rack 19 sí, 1 U
- Canales entrada 8
- Canales analógicos 8
- Conexión Ethernet
- Digital audio inputs 1 x AES/EBU (XLR)
- Digital audio outputs 1 x AES/EBU (XLR)
- Sustainable product not specified
- Salida auriculares no
- Sample rate máximo 192 kHz
- MIDI E/S ninguna
- Entrada DANTE
Peso y las dimensiones incluyen el paquete
- Peso (incluyendo el paquete) 6,1 kg
- Dimensiones (incluyendo el paquete) 61,0 x 44,0 x 11,5 cm
Características del producto
- Focusrite RedNet A8R
- inputs:
- analogue, line: 8
- connector: 25-pin female DB-25 x2, AES59
- 0 dbFS reference level: +18 / + 24 dBu (switchable)
- frequency response: 20 Hz - 20 kHz, - 0.05 dB
- THD+N <0.001% unweighed (-1 dBFS input, 20 Hz - 22 kHz)
- dynamic range: 119 dB (A-weighed, -60 dBFS method)
- dynamic range: 120 dB
- signal to noise ratio: 119 dB, A-weighed, 20 Hz - 20 kHz
- outputs:
- analogue, line: 8
- connector: 25-pin female DB-25 x2, AES59
- 0 dbFS reference level: +18 / + 24 dBu (switchable)
- frequency response: 20 Hz - 20 kHz, - 0.15 dB
- THD+N <0.001% unweighed (-1 dBFS input, 20 Hz - 22 kHz)
- dynamic range: 119 dB (A-weighed, -60 dBFS method)
- dynamic range: 120 dB
- signal to noise ratio: 119 dB, A-weighed, 20 Hz - 20 kHz
- crosstalk:
- input/output > input: <-100 dB
- input/output > output: <-100 dB
- connectivity:
- line Inputs: 1 x DB-25 connector
- line outputs: 1 x DB-25 connector
- channel count: 2 x 2 AES/EBU channels
- input (DARS optional): 1 x XLR-f
- output: 1x XLR
- Word Clock Input: 1 x BNC 75O port (switchable termination)
- Word Clock Output: 1 x BNC 75O port
- PSU: 2 x Internal, 100-240V, 50/60Hz, power consumption 24W
- network: 2 x EtherCON NE8FBH, compatible with RJ45 connectors
-
digital input converter:
- sample rate range: 32 kHz to 216 kHz
- gain error: -0.3 dB
- dynamic range inputs: > 138 dB
- latency: 11 - 45 samples (depending on network and sample rate)
-
digital performance:
- supported sample rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) @ 24 bit
- clock source: internal, Dante Network Master
- external Word Clock Range: nominal sample +/- 7.5
-
network modes:
- redundant: option to connect the A8R to two independent networks
- switched: connects both ports to an integrated network switch for daisy-chain set-ups
-
included:
- 2x IEC AC power cables
- 2x IEC clips
- safety information
- RedNet Getting Started Guide
-
product registration card including links to:
- RedNet Control
- RedNet PCIe drivers
- Audinate Dante Controller
- Dante Virtual Soundcard (DVS) Token and download instructions
Opiniones
Productos similares de otras marcas
Buscar todos los productos en la categoría Convertidores de audio
