- Página principal /
- Productos /
- Flight cases y bolsas /
- Accesorios para flight cases /
- Asas para flight cases /
- Penn Elcom
Asas para flight cases Penn Elcom
Se han encontrado 52 productos
Desta
cado
cado
¿Estás montado un flight case? Entonces, seguro que buscas accesorios resistentes y duraderos. Este asa te ofrece además de protección, eficiencia y comodidad.
Disponible
Disponible
41,00 €
6,60 €
Asa para montar en una flight case con dos orificios preagujereados.
Estimado tiempo de entrega 5 dias laborales
Aproximadamente 5 días laborables
4,79 €
3,12 €
This Penn Elcom strap handle is perfect for a DIY flight case and features a black, plastic strip with metal fixings.
Disponible
Disponible
6,00 €
4,28 €
Desta
cado
cado
Asa fabricada de 0,9 mm de metal de color negro. Fácil de colocar por ejemplo en la carcasa de un altavoz. Tiene una profundidad de 63 mm, con 12 orificios preagujereados.
Disponible
Disponible
10,50 €
7,55 €
Desta
cado
cado
This recessed case handle from Penn Elcom has a sturdy, steel hand grip covered with rubber. Since it's double sprung, it'll dutifully revert back to its original position, no matter how times you lift up your case.
Disponible
Disponible
6,25 €
4,28 €
Desta
cado
cado
Un asa muy cómoda, con mango de goma de 19mm.
Disponible
Disponible
9,95 €
4,55 €
Desta
cado
cado
¿Estás montado un flight case? Entonces, seguro que buscas accesorios resistentes y duraderos. Este asa te ofrece además de protección, eficiencia y comodidad.
Disponible
Disponible
13,15 €
5,80 €
This spring-loaded handle is the perfect finisher for any self-constructed flight case. The Penn Elcom H4051Z is easy to install thanks to pre-drilled mounting holes and has been made of 1.2mm thick steel.
Disponible
Disponible
8,70 €
5,60 €
Desta
cado
cado
Fácil para montar en la carcasa de un altavoz, por ejemplo. Tiene una profundidad de 63 mm y está provista de 10 agujeros .
Disponible
Disponible
14,80 €
6,55 €
This strap handle is made of rubber and steel. It can be mounted easily to your flightcase!
Disponible
Disponible
13,95 €
7,30 €
-55%
The Penn Elcom designed double bar handle has a recessed ABS body fitted with an aluminium handle to provide plenty of room to get a good grip. This flight case part is easily installed via eight pre-drilled mounting holes.
Disponible
Disponible
14,30 €
6,45 €
This is a black-finished, spring-loaded mountable handle from Penn Elcom. It's made of quality steel and features six mounting pre-drilled holes for easy installation.
Estimado tiempo de entrega 14 dias laborales
Aproximadamente 14 días laborables
8,15 €
6,05 €
This handle can be used for your flight case, toolbox or cable box, for instance. It's equipped with two pre-drilled holes and is made of PVC and steel.
Disponible
Disponible
28,00 €
7,75 €
The Penn Elcom H1013 is a black strap handle that can be mounted on your DIY flight case. It's made of a plastic strip with metal ends that can be covered using the included plastic caps.
Disponible
Disponible
4,14 €
2,25 €
Disponible
Disponible
4,84 €
2,87 €
Synthetic pocket handle for speaker cabinets. Has a 102 x 59mm cutout and is equipped with four pre-drilled holes with a diameter of 4.5 mm each.
Disponible
Disponible
4,48 €
2,34 €
A neat finishing touch for a DIY flight case, the Penn Elcom H1025 corner handle has a recessed design to maximise efficiency and comfort while saving space.
Disponible
Disponible
9,65 €
9,25 €
The Penn Elcom H7150/85 backplate is made for mounting and reinforcing a Penn Elcom H7150Z flight case handle.
Disponible
Disponible
3,08 €
1,67 €
Made of black ABS plastic, this Penn Elcom cabinet handle can be grabbed from all four sides. It's comfortable to hold thanks to its large dimensions.
Disponible
Disponible
8,15 €
Strengthen and reinforce a Penn Elcom H1050 or H7159 flight case handle with this compatible baseplate.
Disponible
Disponible
2,84 €
1,55 €
Asa para flight case Penn Elcom H1430 muy resistente con tornillos de níquel. Las medidas de este asa son 15,6 cm de ancho y 6,3 cm de altura.
Disponible
Disponible
7,10 €
3,81 €
The leather-look of this Penn Elcom designed handle adds a deluxe touch to any custom flight case. The handle is easy to install thanks to nickel-finished mounting plates.
Disponible
Disponible
14,90 €
14,20 €
Asa de piel, sirve para colocar en una flight case para guardar cables por ejemplo. El asa tiene cuatro orificios preagujereados con un diámetro de 5.5 mm.
Disponible
Disponible
21,30 €
9,05 €
Disponible
Disponible
3,17 €
1,42 €
The Penn Elcom H1078z flight case handle is easily installed via the pre-drilled holes and comes finished with a comfy rubber grip and a spring-loaded mechanism to keep it neatly tucked in after use.
Disponible
Disponible
6,25 €
4,26 €
This non-spring-loaded flight case handle is easy to secure to your case and comes with a rubber grip for a little extra comfort.
Disponible
Disponible
5,95 €
4,29 €
Need a simple steel handle to polish off a custom flight case? Then this piece of Penn Elcom hardware is just what you're looking for.
Disponible
Disponible
4,74 €
2,13 €
Finish a flight case in deluxe style with the Penn Elcom H1008 leather-look handle. This strap-style handle is easy to install thanks to the metal fittings and is also more comfortable than any straight-up metal handle.
Disponible
Disponible
12,40 €
9,50 €
Create a solid handle for your flight case by mounting this one on. This swivel handle is equipped with M4 mounting points.
Disponible
Disponible
22,45 €
11,30 €
The leather-look of this Penn Elcom designed handle adds a deluxe touch to any custom flight case. The handle is easy to install thanks to nickel-finished mounting plates.
Disponible
Disponible
12,40 €
9,35 €
Designed for finishing off a DIY rack or flight case, the Penn Elcom H1050z handle features a dual spring-loaded mechanism and a recessed design to complete a neat job.
Disponible
Disponible
6,95 €
4,58 €
Mount this Penn Elcom handle onto any flight case along with a set of wheels and turn it into an easy-to-shift trolley.
Disponible
Disponible
46,00 €
18,90 €
This recessed handle with rubber grip is made of 1.5 mm thick steel. It springs back and has a black coating.
Disponible
Disponible
22,10 €
8,40 €
Load heavier gear in and out with smooth ease by equipping your flight case with this Penn Elcom designed retractable trolley handle with wheels.
Disponible
Disponible
64,00 €
56,00 €
Penn Elcom build-in recessed handle with double spring. It is made of 1.5 mm thick steel and has a zinc colour.
Disponible
Disponible
13,15 €
4,95 €
The Penn Elcom H1078k flight case handle is easily installed via the pre-drilled holes and comes finished with a comfy rubber grip and a spring-loaded mechanism to keep it neatly tucked in after use.
Disponible
Disponible
9,45 €
4,82 €
Disponible
Disponible
4,82 €
1,00 €
This ultra-rugged black bar handle is made of ABS. Build this bar handle into your speaker cabinet for easy transport. This handle has a depth of 58.8 mm and is fitted with 8 mounting holes.
Estimado tiempo de entrega 5 dias laborales
Aproximadamente 5 días laborables
30,00 €
14,20 €
Estimado tiempo de entrega 5 dias laborales
Aproximadamente 5 días laborables
21,25 €
10,20 €
Loaded with two springs, made from stainless steel and finished with a rubber grip, the Penn Elcom H7151S flight case handle gives any self-build case a secure and professional finish.
Estimado tiempo de entrega 5 dias laborales
Aproximadamente 5 días laborables
33,00 €
17,50 €
Combine this pull-out trolley handle with a set of wheels and complete the ultimate touring flight case.
Estimado tiempo de entrega 5 dias laborales
Aproximadamente 5 días laborables
27,00 €
21,95 €
Estimado tiempo de entrega 5 dias laborales
Aproximadamente 5 días laborables
48,00 €
33,00 €
Estimado tiempo de entrega 5 dias laborales
Aproximadamente 5 días laborables
81,00 €
74,00 €
Made of rubber, this Penn Elcom strap handle is a solid finishing touch for any self-built flight case.
Estimado tiempo de entrega 14 dias laborales
Aproximadamente 14 días laborables
6,05 €
This back cover is made for the Penn Elcom H1028 cabinet handle. It's fashioned from ABS plastic and features four pre-drilled mounting holes.
Estimado tiempo de entrega 14 dias laborales
Aproximadamente 14 días laborables
6,15 €
4,12 €
The cambered design of the Penn Elcom H1052S spring-loaded fight case handle is far easier to install than a recessed handle, especially since it comes pre-drilled with six screw holes.
Estimado tiempo de entrega 14 dias laborales
Aproximadamente 14 días laborables
16,70 €
15,20 €
This heavy-duty flight case handle from Penn Elcom comes fitted in a two-part recessed dish and features a dual spring mechanism that snaps the handle neatly back in place.
Estimado tiempo de entrega 14 dias laborales
Aproximadamente 14 días laborables
8,45 €
6,65 €
Designed to ensure the solid and secure installation of medium-sized flight case handles like the Penn Elcom H1061, H1064, H7151 and H7154, this backplate is made from 0.9mm-thick steel.
Estimado tiempo de entrega 14 dias laborales
Aproximadamente 14 días laborables
3,60 €
1,34 €