Tascam MZ-123BT 3-Channel Zone Mixer with Bluetooth

Características del producto

• Tascam MZ-123BT Multi-Zone mixer
• analogue audio inputs:
  • microphone connections: 1-2 (balanced)
    • front panel connectors:
      • XLR/TRS combi socket
      • XLR-3-31 (1: GND, 2: HOT, 3: COLD)
      • TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
    • rear connectors:
      • 2 × Euroblock
    • input impedance: 2.4 kOhms
    • nominal input level:
      • –26 dBu (front connector set to HIGH or rear connector PAD OFF)
      • –2 dBu (front connector set to low or rear connector PAD ON)
    • max. input level:
      • –10 dBu (front connector set to HIGH or rear connector PAD OFF)
      • +14 dBu (front connector set to low or rear connector PAD ON)
    • min. input level:
      • –65 dBu (front connector set to HIGH or rear connector PAD OFF)
      • –41 dBu (front connector set to LOW or rear connector PAD ON)
  • line inputs (unbalanced): RCA pin jacks
    • nominal input level: -10 dBV
    • max. input level: +6 dBV
    • input impedance: >10 kOhms
  • aux inputs (unbalanced): stereo mini-jack
    • nominal input level: –20 dBV
    • max. input level: +4 dBV
    • input impedance: 10 kOhms
• analogue audio outputs:
  • outputs 1–3 (balanced): 3 × Euroblock
    • nominal ouput level: +4 dBu (volume knob set to 0 dB)
    • maximum output level: +24 dBu
    • output impedance: 200 Ohms
  • headphone output: stereo jack
    • maximum ouput capacity: 80 mW + 80 mW (THD+N ≤0.1 %, 32 Ohm load)
• audio performance:
  • equivalent input noise (EIN) ≤–125 dB(A)
    • (mic input to line output, 150 Ohms, 20-kHz LPF)
  • frequency response:
    • microphone input to line input
      • 20 Hz – 20 kHz, +0.5 dB / –1 dB
      • (GAIN at min., VOLUME at 0 dB, JEITA)
    • line input to line output
      • 20 Hz - 20 kHz (+/- 0.5 dB)
      • (GAIN at min., VOLUME at 0 dB, JEITA)
  • distortion:
    • microphone input (front) to line output: ≤0.02 %
    • microphone input (rear) to line output: ≤0.01 %
    • line input to line output: ≤0.01 %
  • S/N ratio: >90 dB
  • crosstalk attenuation: ≥80 dB
• Bluetooth:
  • version 4.2
  • output class: Class 2
  • supported profile: A2DP
  • supported A2DP codecs: SBC, AAC, aptX™
  • A2DP content protection: SCMS-T
  • antenna: RP-SMA (female)
• recommended operation temperature: 0–40 °C
• power supply and physical specifications:
  • power supply: AC 100 - 240V, 50/60 Hz
  • power consumption: 25 W
  • dimensions (L x W x H): 48.3 × 27.5 x 4.7 cm
  • weight: 3 kg
• included:
  • power cable
  • 8 Euroblock plugs with cable-tie pack
  • rack mount screw pack
  • user manual
  • Bluetooth antenna