- Página principal /
- Productos /
- Audio profesional /
- Penn Elcom
Promociones Penn Elcom
Se han encontrado 62 productos
Desta
cado
cado
Esta esquina plana Penn Elcom galvanizada tiene tres orificios preagujereados con un diámetro de 5 mm. Tiene unas mMedidas de 49 x 49 mm, fabricada de metal de 1 mm de grosor.
Disponible
Disponible
2,58 €
2,01 €
The Penn Elcom C1373z neatly combines a ball corner with a corner brace. The model is 67mm long, has a 3mm interior radius and comes pre-drilled with six 5mm mounting holes.
Disponible
Disponible
3,44 €
2,75 €
Desta
cado
cado
¿Estás montado un flight case? Entonces, seguro que buscas accesorios resistentes y duraderos. Este asa te ofrece además de protección, eficiencia y comodidad.
Disponible
Disponible
41,00 €
6,60 €
This Penn Elcom strap handle is perfect for a DIY flight case and features a black, plastic strip with metal fixings.
Disponible
Disponible
6,00 €
4,28 €
Desta
cado
cado
Do away with the fuss that comes installing cage nuts with this handy Penn Elcom clip nut. Simply place it over the opening in your rack rail and secure anything in place via its M6 screw thread. Easy!
Disponible
Disponible
0,71 €
0,35 €
Desta
cado
cado
Speaker clamp with a black powder coating. Has an 11 x 7 mm mounting hole.
Disponible
Disponible
1,23 €
0,78 €
Desta
cado
cado
Neatly bundle cables, cut down on stress and cut down on detangle-time with this Penn Elcom designed cable tie. Finished in black, this hook-and-loop cable tie is 20cm long and 1.3cm wide.
Disponible
Disponible
1,58 €
0,54 €
To open Penn Elcom's MOL3 butterfly latch, all you have to do is twist the automatic positioning latch. This large model has a 16mm deep offset dish as well as no less than fourteen mounting holes to guarantee a secure fit.
Disponible
Disponible
15,50 €
14,50 €
A handy addition when building custom flight cases or rack installations, the Penn Elcom AAY0327 internal mounting point is made from zinc-finished steel and punched with a pre-threaded M10 hole.
Disponible
Disponible
5,45 €
3,12 €
Desta
cado
cado
Asa fabricada de 0,9 mm de metal de color negro. Fácil de colocar por ejemplo en la carcasa de un altavoz. Tiene una profundidad de 63 mm, con 12 orificios preagujereados.
Disponible
Disponible
10,50 €
7,55 €
Disponible
Disponible
1,77 €
0,75 €
Tómate el tiempo para agrupar tus cables con este sujetacables y lo disfrutarás durante años.
Disponible
Disponible
6,15 €
1,13 €
This strap handle is made of rubber and steel. It can be mounted easily to your flightcase!
Disponible
Disponible
13,95 €
7,30 €
Desta
cado
cado
Disponible
Disponible
121,00 €
26,00 €
-69%
Made from solid steel and pre-drilled with four mounting holes, this Penn Elcom corner bracket us fully compatible with the EG-0500/2 and EG-0521/2 closure profile.
Disponible
Disponible
3,39 €
1,05 €
-82%
This Penn Elcom double rack profile is 3U high and comes pre-drilled with holes at 15mm intervals for eased installation.
Disponible
Disponible
21,90 €
3,89 €
-71%
The Penn Elcom B1630z bracket can be used to install a 6.7mm panel to serve as an interior divider. Made from 1.2mm-thick steel and pre-drilled with 5.2mm mounting holes, this is a solid finisher for any self-build flight case.
Disponible
Disponible
3,87 €
1,13 €
-77%
This zinc-coloured Penn Elcom steel ball corner is equipped with three pre-drilled holes. It is 58 x 52.5 mm in size and is made of 1.5 mm thick steel.
Disponible
Disponible
3,10 €
0,71 €
-78%
This Penn Elcom designed flat corner has a 5mm internal radius and comes finished with a dimple, making it the ideal finisher for the lid of a flight case.
Disponible
Disponible
4,20 €
0,94 €
-55%
The Penn Elcom designed double bar handle has a recessed ABS body fitted with an aluminium handle to provide plenty of room to get a good grip. This flight case part is easily installed via eight pre-drilled mounting holes.
Disponible
Disponible
14,30 €
6,45 €
This Penn Elcom designed flat corner has a 5mm internal radius and comes finished with a foot, making it the ideal finisher for the base of a flight case.
Disponible
Disponible
4,79 €
3,88 €
This zinc-coloured Penn Elcom steel ball corner is equipped with six pre-drilled holes with a diameter of 5 mm each. Its dimensions are 65 x 65 mm and it is made of 1.8mm-thick steel.
Disponible
Disponible
4,99 €
3,22 €
This Penn Elcom ball corner is specifically made for 22mm extrusions. It's made of steel and has a 1.2mm internal radius to offer superb protection for the corners of your case.
Disponible
Disponible
1,81 €
1,25 €
Disponible
Disponible
3,97 €
2,77 €
Penn Elcom's SG-9407 steel flange bolt has an M6 hex head and is 16mm long. It features a self-locking design including a knurled ring.
Disponible
Disponible
0,62 €
0,16 €
This zinc-coloured Penn Elcom steel ball corner has three pre-drilled holes with a diameter of 5 mm each. It is 59 x 59 mm in size and is made of 1.5 mm thick steel.
Disponible
Disponible
2,83 €
1,51 €
This rack strip features 9.5mm diameter punched holes at 15mm intervals. It can easily be attached to a flight case by means of its 5mm mounting holes. This rack strip is fashioned from 2.00mm steel and has a height of 2 U.
Disponible
Disponible
13,40 €
2,91 €
Need a sturdy hinge with a built-in stay to finish a custom flight case? The Penn Elcom P1955S is perfect for heavier lids.
Disponible
Disponible
8,00 €
6,85 €
Designed by Penn Elcom, this brace-and-ball-corner in one is made of steel and comes with a 30mm offset on one leg only, making it a solid piece of hardware for lidmaker extrusions.
Disponible
Disponible
3,14 €
1,50 €
This rugged flat corner can is ideal for your DIY flight case. It offers optimal protection against hits during transport.
Disponible
Disponible
3,44 €
1,71 €
Need a simple steel handle to polish off a custom flight case? Then this piece of Penn Elcom hardware is just what you're looking for.
Disponible
Disponible
4,74 €
2,13 €
This ball corner not only protects against impacts but reinforces your flight case at the same time. It's also easy to mount thanks to the three pre-drilled mounting holes.
Disponible
Disponible
3,61 €
1,39 €
When it comes to touring, preparation and organisation are key. As such, it's never a bad idea to furnish your flight case with this tour label dish from Penn Elcom so you always know exactly what's (supposed to be) inside.
Disponible
Disponible
16,60 €
6,50 €
Disponible
Disponible
30,00 €
11,50 €
This ventilation dish provides an easy exit for heat from, for instance, your smoke machine. The dish is fashioned from 1.5 mm thick, zinc-coloured steel.
Disponible
Disponible
43,00 €
5,75 €
Finish a custom rack or flight case with this Penn Elcom locking latch and be assured of solid security.
Disponible
Disponible
19,55 €
11,50 €
Este cierre en forma de mariposa de Penn Elcom es muy resistente y está equipado con un mecanismo que se cierra y se abre simplemente rotando un ala. Sin placa, con una profundidad de 10 mm.
Disponible
Disponible
27,00 €
11,80 €
The Penn Elcom L2471 slam latch has been purpose-made to finish a Slam Lid system so you can secure a lid to the side of a flight case.
Disponible
Disponible
8,95 €
8,55 €
Made from heavy-duty metal, the Penn Elcom B0706n corner bracket features rounded corners and pre-drilled mounting holes.
Disponible
Disponible
1,16 €
0,45 €
Made by Penn Elcom, this solid steel box corner is fully prepped to securely finish off a self-build flight case or speaker cabinet. This edition comes in nickel.
Disponible
Disponible
3,45 €
1,32 €
This lockable draw latch by Penn Elcom is made of steel and has a chrome finish and 3mm mounting holes.
Disponible
Disponible
69,00 €
7,90 €
Made from 1.2mm-thick steel, this Penn Elcom case corner has a 12mm internal radius and a neat and flat, stackable design.
Disponible
Disponible
4,74 €
2,68 €
Mount a Penn Elcom C1819 wrap-around corner on every corner of your custom speaker cabinet and ensure solid protection against knocks and bumps. This edition has a 12mm internal radius and a two-legged design with two 4mm mounting holes.
Disponible
Disponible
4,36 €
1,40 €
Penn Elcom's 100mm-thick shock-absorbent foam Polybloc protects your valuable equipment from damage during transport.
Disponible
Disponible
229,00 €
195,00 €
Disponible
Disponible
216,00 €
189,00 €
This 1.7-metre-long rack profile is made of 3mm aluminium and features pre-drilled holes with a 9.5mm diameter.
Disponible
Disponible
53,00 €
21,40 €
Disponible
Disponible
2,00 €
0,64 €