- Página principal /
- Productos /
- Audio profesional /
- Set de altavoces /
- JBL /
- JBL Sistema JRX 200 set de sonido
JBL Sistema JRX 200 set de sonido
General
The JBL JRX 200 System is a very complete, perfectly in-tune sound set. This set contains two passive satellite speakers (JRX215), two subwoofers (JRX218S), 35mm distance rods (MTA 21336), two Crown XTi1002 amplifiers and a rugged, 4U flightcase. The set is more than powerful enough to handle small halls as part of a mobile setup and gives you a rugged sound, especially considering its price tag. All you additionally need is cables.
JRX 200 system: satellite speakers and subwoofers
The JRX215 is a reliable two-way 15-inch full-range speaker with a maximum power capacity of 250 watts RMS (1,000W peak) and a maximum SPL of 129 dB. The tweeter is 25 millimetres across and helps to ensure a detailed sound. Additionally, the JRX 218 subwoofers in this set take care of all the frequencies up to 250 Hz. The compact 18-inch passive subwoofer has a maximum power of 350 watts RMS and pairs perfectly with the JRX215 satellite speakers. Its frequency response runs from 35 to 250 Hz, allowing you to feel the bass as well as hear it.
Crown XTi 1002 amplifier
Crown’s XTi series is very successful thanks to their amazing price to quality ratio. This set comes with two XTi 1002 amplifiers. The amp is 2 U high, weighs just 8 kilos and offers more than enough power for the set. Its built-in processor allows you to use the equalizer, delay, peak limiter and numerous presets. Additionally, the built-in crossover is perfect to separate the subwoofer and the satellite speaker. This is the perfect all-in-one option for a very complete setup without investing in expensive auxiliary equipment.
Características
Características del producto
- Número de cabezales 2
- Número de subwoofers 2
- Incluido set altavoz amplificador, fundas/estuches
Peso y las dimensiones incluyen el paquete
- Peso (incluyendo el paquete) 150,0 kg
- Dimensiones (incluyendo el paquete) 139,0 x 111,0 x 77,0 cm
Características del producto
- very complete, in-tune sound system
- consists of: see below
2x JBL JRX215 15-inch full-range speaker
- passive full-range speaker
- HF driver: JBL 2414H-C (1 inch)
- LF driver: JBL M115-8A (15 inches)
- input: Neutrik SpeakOn NL-4, 6.3mm TS jack
- power RMS: 250W
- peak power: 1,000W
- frequency range 4π (-10 dB): 53 Hz - 19 kHz
- frequency range 2π (-10 dB): 41 Hz - 18 kHz
- frequency range 4π (±3 dB): 80 Hz - 14 kHz
- frequency range 2π (±3 dB): 59 Hz - 13 kHz
- sensitivity (@ 1m): 99dB SPL (1W/1m)
- nominal impedance: 8 ohms
- recommended amplifier capacity: 250 - 500 watts @ 8 ohms
- maximum SPL: 128 dB
- nominal dispersion: 90 x 50 degrees
- crossover frequency: 2.2 kHz
- housing: 19mm MDF with a black finish
- steel handles
- mount socket: 36 mm
- dimensions: 699 x 460 x 432 mm
- weight: 27.4 kg
2x JBL JRX218S 18-inch passive subwoofer
- passive subwoofer
- LF driver: JBL M118-4 (18 inches)
- input: Neutrik SpeakOn NL-4 (2x parallel)
- continuous power: 350 watts
- peak power: 1,400 watts
- frequency range 4π (-10 dB): 35 Hz - 250 Hz
- frequency range 2π (-10 dB): 35 Hz - 250 Hz
- frequency range 4π (±3 dB): 54 Hz - 250 kHz
- frequency range 2π (±3 dB): 53 Hz - 250 kHz
- sensitivity: 98 dB SPL (1W/1m)
- nominal impedance: 4 ohms
- recommended amplifier capacity: 350 - 700 watts @ 4 ohms
- maximum SPL: 133 dB @ 1m
- dimensions: 605 x 508 x 551 mm
- weight: 32.2 kg
2x Crown XTi 1002 amplifier
- powerful, 2U high amplifier
- with processor
- power @ 2 ohms: 2x 700 W
- power @ 4 ohms: 2x 500 W (1x 1,400W bridge)
- power @ 8 ohms: 2x 275W (1x 1,000W bridge)
- volume control per channel
- on/off switch
- processor menu buttons with LCD
Processing:
- input EQ with 6 filters per channel
- crossover filters
- output EQ with 8 filters per channel
- delay function
- SubHarmonic Synth: handles the subtones and lowers the sound by an octave
- Peak Plus Limiter with threshold, attack and release
- 30 presets
Indicators:
- signal indicator: green LED, 1 per channel
- -10dB indicator, green LED, 1 per channel
- -20dB indicator, green LED, 1 per channel
- ready indicator, green LED, 1 per channel
- clip indicator, red LED, 1 per channel
- over-heating indicator, red LED, 1 per channel
- on/off indicator, blue LED, 1x
Inputs and outputs:
- 3-pin XLR inputs, balanced, 1 per channel
- loop connector for chaining, balanced, 1 per channel
- Neutrik SpeakOn NL4MP outputs, 1 per channel
- binding posts, 2 per channel
Technical:
signal/noise ratio: 100 dB
- frequency range: 20 to 20,000 Hz
- total harmonic distortion: 500
- crosstalk
- mains voltage: 100-230 V AC, 50/60 Hz
- operating temperature: 0 to 40 degrees Celsius
- steel housing
- aluminium front panel
- fan-cooled, front-to-rear
- dimensions: 483 x 89 x 312 mm (19-inch, 2U)
- weight: 8.4 kg
2x JBL MTA21336 distance rod
- suitable for the speakers from JBL’s JRX, EON, PRX, MRX and STX series
- distance rod
- colour: black
- fitted with both a Quick Release and a safety screw
- adjustable in height between 945 and 1,475 mm
- tube diameter: 35 mm
- weight: 2.24 kg
1x flightcase 4U
- rugged flight case
- suited for professional use
- made in Germany
Opiniones
Reseñas de otros países
Traducir todos los comentarios al español
Hallo,
Hoeveel personen kan deze Set aan
Alvast bedankt dj qwanto
Otros productos de JBL
Buscar todos los productos de JBL
met deze set kan 200 tot ongeveer 400 man voorzien van geluid de set klinkt uitermate goed !